Bee2Fire Industrial

Industrial fire prevention.
Before the incident happens.

Continuous monitoring of refineries, mining zones, chemical plants, and energy infrastructure. Detects gas leaks, anomalous heat signatures, and thermal runaway — before they become catastrophic.

Scroll
1 %
Specificity
-20º to 0ºc
Measurement range
0 min
Alert Time
1×7
Operation

Industry Verticals

Built for your industry.

Bee2Fire Industrial is deployed and certified across eight major industrial sectors — each with tailored sensor configurations, alarm protocols, and integration pathways.

Oil & Gas Refineries

Thermal runaway detection, flare stack monitoring, tank farm heat anomaly mapping, and ATEX zone compliance — continuous surveillance of the highest-risk process environments.

Mining Operations

Open-pit fire monitoring, conveyor belt thermal detection for friction ignition, and underground ventilation shaft anomaly alerts — protecting equipment and personnel across large extraction sites.

Chemical Plants

Reactive compound gas monitoring at parts-per-million thresholds, process anomaly thermal signature detection, and spill heat mapping — enabling prevention rather than response.

Energy Infrastructure

Transformer overheating detection, substation thermal mapping, cable fault early warning, and renewable energy perimeter fire risk monitoring — protecting generation and distribution assets.

Port Facilities

Cargo container thermal scanning for spontaneous combustion, fuel depot monitoring, vessel fire risk assessment, and bulk material storage heat anomaly detection — covering the full port footprint.

Data Centres

Server room thermal mapping, UPS bank monitoring for battery thermal events, precision cooling failure detection, and hot-aisle containment breach alerting — protecting mission-critical infrastructure.

Recycling and Waste

Self-ignition risk in stacked material invisible to smoke detectors — surface gradient monitoring

EV Charging Stations

Lithium battery thermal runaway — the continuous thermal view operators didn’t have

Detection Technology

Industrial-grade sensing.
Certified performance.

Three purpose-built sensor layers, each calibrated for industrial process environments. The Bee2Fd-D2L sensor carries RIPCI certification (Applus+), validating compliance with industrial fire detection regulatory requirements.

Thermal Imaging

LWIR focal plane arrays calibrated for industrial process temperatures across a -20 to 150°C range, identifying heat anomalies from equipment failure or incipient fire within seconds of onset.

Gas Spectrometry

Hydrocarbon and combustion gas detection at parts-per-million thresholds — identifying volatile leaks and reactive gas accumulation before any visible flame or smoke forms.

Visual Analytics

AI flame and smoke detection optimised for industrial backgrounds — handling steam, dust, and process emissions that cause conventional systems to generate high false-alarm rates.

From Reactive to Predictive

Stop fighting fires.
Start preventing them.

The shift from reactive to predictive industrial fire safety is measurable — in response time, incident cost, and operational continuity.

Traditional — Reactive

Detect after the fact.
Human patrol — limited hours, inconsistent coverage, fatigue-affected reliability
Manual thermal inspections — periodic, expensive, subject to scheduling gaps
Delayed response — average 18+ minutes from ignition to intervention
High incident cost — equipment replacement, production downtime, regulatory penalties
No pre-ignition visibility — alarms only after fire is already established

Bee2Fire — Predictive

Prevent before it ignites.
Continuous AI monitoring — 24×7, zero fatigue, 100% of the facility perimeter at all times
Automated thermal detection — real-time temperature mapping, no scheduling or crew required
<30s alert time — from anomaly detection to operator notification with GPS coordinates
Pre-ignition gas detection — alerts raised before visible smoke or flame in many scenarios

Start a Conversation

Talk to us about
your project.

Tell us about your terrain and we will design a detection architecture around your specific needs — no commitment required.

TECHNICAL ASSESSMENT
Site-specific detection architecture design

LIVE DEMO
See the platform operating on real data

First & Last Name *
Fill out this field
Email *
Please enter a valid email address.
Phone *
Fill out this field
Company Name *
Fill out this field
Sector
Select your sector
Select an option
Type of Inquiry
Select inquiry type
Select an option
Message *
Fill out this field
Privacy Policy *
You need to agree with the terms to proceed

Protect your facility.

Schedule a technical assessment with our industrial detection architects. We’ll design a monitoring architecture for your specific site, process environment, and regulatory requirements.